Quick & Messy Alginate Hand Lifecasting With Object

Quick video using alginate to make a mold for a hand cast and an object. I had to use some out of date alginate, just to use it up and thought I would experiment with casting a hand holding an object which was/is a small ball based on a drawing I did a while back.

The video is a bit rough and ready and shows what not to do in parts, for example, pour your alginate powder into water, rather than pour the water into the alginate powder. Find yourself suitable containers to house the alginate in accordance to your project.

Try to release as much air as you can by tapping the mold after pouring the plaster of Paris into the alginate. Go careful when cutting the alginate away from your lifecast to avoid damaging your plaster of Paris cast.

The alginate used in this video is a 3/1 mix, which means 3 parts water to 1 part alginate. The plaster of Paris was mixed to a 50/50 mix, which means 1 part plaster of Paris to 1 part water or 50% water to 50% plaster of Paris.

If you enjoyed this video, please like and share. 🙂

Build A Plaque | Part One

A nice and simple way to build a plaque model by embedding objects into plaster of Paris.

In this case we use a skull model to embed into the plaster of Paris to make the plaque model, which will then be molded to make further replicas of the plaque which will be casted in materials such as concrete and resin.

This plaque model template will also be useful for embellishing with designs to create other unique plaque designs.

Part One | Alien Sculpt | Building & Sculpting The Head

Sculpting an alien with Monster Clay. In this video we build the armature/foundation, add layers of clay and sculpt the alien head ready for the next video where we will be adding alien tentacles to the sculpt. The alien sculpt in the video is inspired by the alien featured in the early 1950s film, Invaders From Mars.

When the sculpture is finished, it will be molded and casted to reproduce replicas of the original sculpt.

If you enjoyed this video, please like and share. 🙂

Fairy Door Crafts & Projects | Full Series

Fairy door crafts & projects full series video including archives and extras.

Part One (0:00) – Make A Fairy Door With Monster Clay.
Make a fairy door using clay. In this video a small fairy door is sculpted from Monster Clay Soft in view of making a slicone mold to reproduce further replicas from the original.

Part Two (18:22) – Pour A Silicone Mold.
Make a silicone rubber mold for a fairy door by pouring measured silicone component parts into mold house to create a mold of a model.

Part Three (25:51) – Casting With Polyester Resin.
The process of casting polyester resin is shown using silicone molds (part two) to pour the polyester casting resin into, to create solid polyester resin casts.

Part Four (32:56) – Casting With Concrete.
In this video, we use a silicone mold, made in part two, to cast a concrete fairy door.

Part Five (35:04) – Paint A Fairy Door.
Showing the painting process on a fairy door. This is the way in which we paint many items here and of course there is a vast variety of ways to paint pieces and castings.

Archives & Extras:

Part Six (41:29) – Make A Fairy Door With Recycled Items.
Make a fairy or faerie door using objects around the house and garden. Most of the items in this fairy door are used with recycled items, including a ring pull from a tin can and stones or rocks from the garden.

Part Seven (1:01:17) – Concrete Cast From Latex Mold.
You can make your latex mold from a fairy door sculpture or cast. Simply pour the concrete into the mold and wait around 24 hours for the concrete to set.

Part Eight (1:06:19) – Paint A Fairy Door II.
In this video a fairy door is painted using dry brush techniques along with regular painting techniques. The fairy door is made with concrete and is casted from an original fairy door created by Dramamask Evolution.

Part Nine (1:14:58) – Fairy Door Speed Paint.
Experimenting with painting a fairy door casted with plaster of Paris.

Make A Snowman With Polymer Clay

Dramamask Evolution Christmas Special for 2018. Make a snowman for Christmas using Super-Sculpey polymer clay. This video shows a quick and easy way to make a snowman with polymer clay, plus painting the snowman with acrylic paints.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Part One | Make A Celtic Mirror | Building The Model

In this video we show how to make a Celtic mirror, or Celtic mirror frame by using EVA foam to build the model, in view of making a mold. This video covers making the mirror frame model and making it ready to make a mold.

Other videos in this series include making the mold, casting the mirror frame using the mold, painting and sealing the mirror and constructing the final cast(s) of the final production.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

YouTube: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Steemit: https://steemit.com/@dramamask
Minds: https://www.minds.com/Dramamask
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Instagram: https://www.instagram.com/dramamask1973
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution
Patreon: https://www.patreon.com/dramamask

For molding and casting enthusiasts, please visit: www.diymolds.com
Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Make A Fairy Door With Clay

Make a fairy door using clay. In this video a small fairy door is sculpted from Monster Clay Soft in view of making a slicone mold to reproduce further replicas from the original.

Monster Clay is an oil based clay which requires heating up to become pliable. When set hard, the Monster Clay is ideal to carve and sculpt.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

YouTube: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Steemit: https://steemit.com/@dramamask
Minds: https://www.minds.com/Dramamask
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Instagram: https://www.instagram.com/dramamask1973
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution
Patreon: https://www.patreon.com/dramamask

For molding and casting enthusiasts, please visit: www.diymolds.com
Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Make Tea Light Candle Holders | Full Series

Make Tea Light Candle Holders | Full Series.

Three part video series – making tea light candle holders. Related videos: Basic Mother Mold For Latex Mold Using Plaster Of Paris Bandage: https://youtu.be/A_moX2WDJGA Make A Two Piece Plaster Mother Mold: https://youtu.be/NIP-59u0-DA

Part One – Make & Sculpt A Wood Stump Tea Light Candle Holder.
Make and sculpt a wood stump tea light candle holder using plaster of Paris for the carving template. Also in this video, a paint job is applied to the model sculpture tea light holder to demonstrate paint effects and to seal the finished model/sculpture ready for latex molding, to create reproduction casts.

Part Two – Latex Mold A Tea Light Candle Holder.
Following on from sculpting a tea light candle holder from plaster of Paris, this video shows how to make a latex mold to reproduce copies of the original sculpt or pattern.

Part Three – Cast A Concrete Tea Light Candle Holder.
Cast a tea light candle holder with concrete. Using original plaster sculptures for models to make the latex molds, reproductions of the original sculpture can be casted using concrete poured into the latex molds. This video shows the process of casting the concrete casts from the latex molds to make the tea light candle holders.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Update December 2017 | Artwork | Molding & Casting | Moonrunner Music | Christmas Greetings

Update December 2017 | Artwork | Molding & Casting | Moonrunner Music | Christmas Greetings.

Getting things cleared up and prepared for Christmas, along with items to put up on Etsy. Dramamask artwork. Artwork by Renata Cavanaugh: https://www.facebook.com/RenataFantasyArt. Moonrunner Music: Moonrunner Music YouTube Channel

Christmas greetings from Astrocat and Drama – happy Christmas and a happy new year!

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI

Make A Skull Candle Holder

In this video, a skull is casted from plaster of Paris and a candle with a dripping effect is added to the casted skull. A hole is drilled into the top to fit a tea light candle with the finished model emulating a dripping candle over a skull. A suitable prop for this time of the year – Halloween, plus a dark piece of decor for all year round.

The model created in this video is built in view of making a latex mold, to cast further reproductions in concrete. the model will be used as the template or pattern to make the latex mold. How to make the model and a paint effects example are shown in this video. You can find out how to make a latex mold on the Dramamask Evolution channel.

If you enjoyed this video, please like and share. 🙂

Any comments, please post below. 🙂

Subscribe at: www.youtube.com/dramamask2011
Website: www.dramamaskevolution.com
Facebook: www.facebook.com/dramamaskevolution
Twitter: www.twitter.com/dramamask
Ebay: www.ebay.co.uk/usr/dramamaskevolution
Etsy: www.etsy.com/uk/shop/DramamaskEvolution

For molding and casting enthusiasts, please visit: www.diymolds.com

Music by Angel Rust

Related videos:
Make & Sculpt A Wood Stump Tea Light Candle Holder: https://youtu.be/6yocuNhUmFg
Cast A Concrete Tea Light Candle Holder: https://youtu.be/nIbzX78evyk
Make & Sculpt A Celtic Plaque: https://youtu.be/irwl__pX11Q
Make A Gargoyle | Sculpting | Molding | Casting | Painting Effects | Full Series: https://youtu.be/e3qu–QknLI
Make A Hand Lifecast With Alginate & Plaster Of Paris: https://youtu.be/g5HmOXGA82E
Make A Concrete Leaf: https://youtu.be/xmlXV_dqFUI